Voltage supply
4.75...30 VDC
Reverse polarity protection
Yes
Consumption w/o load
≤40 mA (24 VDC)
≤130 mA (4.75 VDC) + output load, max. 250 mA
Pulses per revolution
1024 … 80000
Accuracy
≤60 arc-seconds
Sensing method
Optical
Output frequency
≤300 kHz (TTL)
≤160 kHz (HTL)
Output signals
A, B, Z
A, B, Z + complement, ½ cycle index gated with negative B channel
Output stages
Linedriver (TTL, 7272) Vout = 5 V, short-circuit proof
Push-pull (HTL, 7272) Vout = Vin, short-circuit proof
Interference immunity
EN 61000-6-2
Emitted interference
EN 61000-6-3
Approval
UL approval / E240061
RoHS compliant EU guideline 2011/65/EC
CE
Technical data - mechanical design
Size (flange)
ø3.15" (ø80 mm)
Shaft type
ø0.375...1" (ø9.525...25.4 mm) (through hollow shaft isolated)
Bore runout
0.0016" (0.04 mm) TIR max.
Admitted misalignment
0.004" (0.1016 mm) radial TIR (end of shaft)
0.01" (0.254 mm) axial
Protection EN 60529
IP 54
IP 65
IP 67
Operating speed
≤5000 rpm (see temperature diagram)
Bearing
52100 SAE high carbon steel (ABEC 5)
Starting torque
≤3 in-oz (77 °F, IP 65)
≤0.02 Nm (+25 °C, IP 65)
Rotor moment of inertia
2.3 oz-in² (420 gcm²)
Service life
Bearing: typ. 13 billion rev. (89000 h/2500 rpm)
Material
Housing: aluminium, powder-coated
Shaft: stainless steel
Operating temperature
-40...+212 °F (-40...+100 °C), (fixed cable): see temperature diagram
Relative humidity
98 % non-condensing
Resistance
EN 60068-2-6 Vibration 20 g, 60-2000 Hz
EN 60068-2-27 Shock 200 g, 6 ms
Connection
MIL-connector, 7-pin
MIL-connector, 10-pin
Cable (AWG26 wire)
Weight approx.
23 oz.
660 g